How to update Digimaster 3 software on Windows XP/7/10

Digimaster 3 software download on Windows XP/7/10:
via the Yanhua official site: http:/iccdp.com/
Click on “Download” and find out the correct software used with digimaster 3

 Digimaster 3 operation system:
Windows XP (except version 2002);
Windows 7 32 or 64 bit
Windows 10 (need luck)

For Digimaster 3 Windows 10:
you have to set up something first when you finish Digimaster 3 software installation:
run Digimaster 3 properties and go to compatibilities and tick on run as admin

you’re advised to use Windows 7 without anti-virus application! The path cannot be changed and the app must be saved in the disk C: (if you install it in other disks, you will fail to open the app for use; if you have changed the path, please uninstall and install it again.)


Tip: cannot run Digimaster 3 on Windows 7 system
A8: go to Digimaster 3 properties->compatibilities->run as admin->ok->update

Tip: How to connect Digimaster 3 to a laptop/computer and how search data saved (that is read out by Digimaster 3)
A11: you can take out the SD card from Digimaster 3 machine and put it into a car reader to connect to a laptop to get data read out; also, you can connect Digimaster 3 directly to the laptop:

Windows XP:
go to the official site and download D3 TOOLS software;
connect D3 and the laptop using a mini USB cable;
connected successfully;
then you can read data in my computer->mobile device

Windows 7:
directly connect D3 and the laptop using a mini USB cable;
connected successfully;
pop up info from Windows Mobile device center and connection succeeds;
click on “not set up” and connect;
click on file management->NandFlash->YHTech->User
(if you want read data from the D3 SD card, firstly you should install Digimaster 3 and the like)

https://gm-tech2-china-clone.blogspot.com/