software free download

Monday, February 27, 2017

Free download Carprog v10.05 airbag software

Here, CarProg software v10.05 download on Mega:

https://mega.nz/#!Ld5lnbZQ!c_i7rpz1yib95Z2C7qZ6picJPnpvfUz8dChm2OdxS0c

No pass

Not tested

Unknown security

No one holds responsibilities of it

For sake of security, you are advised to use

Carprog v9.31 offline version

Carprog v8.21 online version

Both professionals tested it OK & ensure it’s working 100%

Carprog v10.05 update info:

Some cars added to version 10.05...

AUDI A3 NEC35XX DIAG OUT 10.05

CHRYSLER PACIFICA 2015 OBDII ADD 10.05

FIAT TORO MM 70F3525 OBDII ADD 10.05

FIAT ONE WAY MM 2015 OBDII ADD 10.05

FORD ECOSPORT 2013 9S12XEQ384 OBDII ADD 10.05

FORD ESCAPE 2013 SPC5606S OUT 10.05

FORD ESCAPE 2013+ SPC5645S ADD 10.05

FORD EXPLORER FULL LCD 2015 OBDII ADD 10.05

FORD FUSION 2013 2XLCD DIAG ADD 10.05

FORD FUSION 2014 SPC5606 DIG ADD 10.05

FORD FUSION 2015 SPC5606 DIAG ADD 10.05

FORD FUSION FULL LCD 2015 OBDII ADD 10.05

FORD MONDEO FULL LCD 2015 OBDII ADD 10.05

HYUNDAI -DIAG- I30 A1 MULTI OBDII ADD 10.05

INFINITI QX60 2013 OBDII ADD 10.05

KIA -DIAG- CEED 2014+ OBDII ADD 10.05

LAND ROVER FREELANDER 2013+ MB91F224 OBDII ADD 10.05

LINCOLN -DIAG- MKC FULL LCD 2015 OBDII ADD 10.05

JAGUAR XF 2008 OBDII ADD 10.05?

JEEP RENEGADE OBDII ADD 10.05

WRANGLER 2007-> OBDII ADD 10.05

NISSAN NV200 9S12 OBDII ADD 10.05

OPEL -DIAG- ADAM ADD 10.05

OPEL -DIAG- MOKKA ADD 10.05

RENAULT - CAN OBDII - CAPTUR A1 MULTI ADD 10.05

RENAULT - CAN OBDII - CLIO IV A1 MULTI ADD 10.05

RENAULT - CAN OBDII - DUSTER MB96F A1 MULTI ADD 10.05

RENAULT - CAN OBDII - LAGOON 3 VDO A1 MULTI ADD 10.05

RENAULT - CAN OBDII - MEGANE 3 VDO A1 MULTI ADD 10.05

RENAULT - CAN OBDII - LODGY MB96F A1 MULTI OBDII ADD 10.05

RENAULT - CAN OBDII - TRAFIC III OBDII ADD 10.05

RENAULT - CAN OBDII - TRAFIC III A1 MULTI OBDII ADD 10.05

RENAULT - CAN OBDII - TWINGO3 A1 MULTI OBDII ADD 10.05

SEAT LEON NEC35XX DIAG OUT 10.05

TOYOTA AURIS 2015+ OBDII ADD 10.05

VW GOL G6 MM 70F3241 ONLINE DIAG

VW GOLF7 ALL OUT 10.05 OFFCORSE KKKK

VW T5 2013-> -DIAG- ADD 10.05

VOLVO V60 2013+ OBDII ADD 10.05

ADD EMULATORS

AUDI A3 2004+ A1 MULTI

VOLVO DASH A1 MULTI

Carprog v10.05 is verified working...

Carprog airbag:

You can learn that Carprog can do functions (full immo, full dash, full processor, full radio codes) in the carprog manual or description

But Carprog clone is only good at airbag reset and opel pin code reading

VAG (Audi, VW, Skoda, Seat) Airbag Reset Tool

BMW Airbag Reset Tool

Mercedes Benz Airbag Reset Tool

FORD Airbag Reset Tool

GM Airbag Reset Tool by OBDII

CarProg CR16 Airbag tool - Audi, Mercedes, Ford, Volvo

Renault Airbag reset tool

Peugeot Airbag Reset tool

Citroen Airbag Reset tool

Honda Airbag Reset tool

Audi Airbag reset tool by direct connection to EEPROM or MPU

Ford Airbag Reset tool by direct connection to EEPROM or MPU

Hyundai Airbag Reset tool

KIA Airbag Reset tool

Lexus Airbag Reset tool

Rover Airbag Reset tool

Mazda Airbag Reset tool

Mitsubishi airbag reset tool

Nissan Airbag reset tool

Mercedes Benz Airbag Reset tool by direct connection

Opel Airbag reset tool by direct connection

Saab Airbag reset tool by direct connection

Subaru Airbag reset tool by direct connection

Toyota Airbag reset tool by direct connection

Alfa Romeo Airbag Reset Tool

Fiat Airbag Reset Tool

Porsche Airbag Reset Tool

Suzuki Airbag Reset Tool

Volvo Airbag Reset Tool

Daewoo Airbag Reset Tool

Good luck with Carprog 10.05.

Source:http://www.obdexpress.co.uk/service/carprog-v1005-airbag-software-free-download-17513.html

Free Download Consultiii Plus V61.10 And GTR 41.10

consultiii plus V61.10
https://mega.nz/#!PFZkRDoQ!b5oC6HvJpnhAjvN_46O6uWz7d4UOmEakzb1_Nf63s2M

GTR 41.10 https://mega.nz/#!mYBmhKCQ!ImyHVhqDk18hwq4P3Ihnj4tMKP3N5cs1mvEiIeJ0qLE

Thursday, February 23, 2017

Ford IDS v104.01 Software Free Download

Here, ford ids v104.01 software free download on Mega:

https://mega.nz/#!aEwjTToQ!s6yfr_DbsdI5EJikNttOU1dzR5n_FwduRKO0YK4M3qc

Ford ids software crack

No need user name

No password

Can be installed on any computer with Windows XP(SP2 or later), win 7, win 8 and win 10

No need the virtual machine to install the software

How to install ford ids software:https://youtu.be/4ggG3DgXKG0

ford ids scan tool for sale:

VCM IDS 3 for Ford and Mazda (tested OK, works perfect)

Ford vcm ii (not tested yet, needs luck)

Note: for vcm 2 clone, you can go to http://www.obdexpress.co.uk/producttags/vcm2.html

ford ids vcm3 functions:

OBD2 Diagnostics
2. Vehicle Reprogramming: reprogramming for all Ford & Mazda vehicles
3. Immobilizer and smart keys programming
* All ford vehicles(Include all functions of original VCM/IDS);
* All mazda vehicles(Include all functions of original VCM/IDS)

ford ids software update complete!

source:http://blog.obdexpress.co.uk/2017/02/23/download-vcm-ford-ids-104-01-tested-yes/

Saturday, February 4, 2017

WinOLS v1.721 v1.500 Free download (no need activation)

Here, you can free download WinOLS version 1.500 and v1.721 to modify the memory contents of ECUs that all data and maps are stored in project files.

Where to get WinOLS?
[free] WinOLS v1.721 with unknown security
https://rapidshare.com/files/546425337/WinOLS_1.721_Setup.part1.rar
https://rapidshare.com/files/524736303/WinOLS_1.721_Setup.part2.rar
https://rapidshare.com/files/3041142174/WinOLS_1.721_Setup.part3.rar
https://rapidshare.com/files/3630163119/WinOLS_1.721_Setup.part4.rar
[free] WinOLS version 1.500 with unknown security
https://mega.nz/#!Qh9GTZTK!_srZ_LS0ODKkwXrWWHVlk0z8KJmfV4gunAS8zQFH35c
[safe, never expires] working WinOLS v1.500
http://www.obdexpress.co.uk/wholesale/winols-version-1500-with-unlock-patch.html
(WinOLS Version 1.500 with unlock patch, it can be replicated with no activation. )

What is Winols?
WinOLS is an application, which is written especially to modify the memory contents of Engine Control Units (ECUs).
It makes it easier to search and find maps, which can be named, displayed in several ways and be modified. All data and maps are stored in project files. These project files contain all information, which are gathered during the modification of the ECU. Additional data can be added too.

How to install Winols 1.500?
1. Uninstall the anti-virus software or any firewall software
2. Run "winols 1.500.exe" on Windows XP O/S
3. Unpack "CRACK.rar", then copy the 4 files in it to WINOLS install folder
4. Run "loader REG.exe" , open "key.txt" and copy the username and license to the registration window.
5. Run "loader OLS.exe"

Detailed installation reference:
1) Install WinOLS V1.500 setup
Open winols 15.00 folder
Open and install setup-winols 1.500
Save file to Local Disk C://

2) Install WinOLS 1.500 crack
Extract WinOLS crack on the desktop
Open crack folder on the desktop
Copy all file in the crack folder
Right Click WinOLS 1.500 setup shortcut>>Find Target, and then paste all files in crack folder here

3) Install Loader REG.exe
Open Loader REG.exe on the folder
Accept the security key require notice
Copy and paste the name and key on key.txt to the Enter Key windows. Key is valid and has been stored

4) Install Loader OLS.exe
Open Loader OLS.exe
Follow the system prompt to install the loader
Delete WinOLS 15.00 setup and REG crack folder on the desktop
Cut and paste Loader OLS to desktop
Open Loader OLS shortcut on the desktop
Start using WinOLS software

How to solve errors on start?
For those reporting that the program give errors on start:
Do not start directly "olsstart.exe" ! just use the shortcut created on the desktop of the computer. If you will start directly errors like "Error 0." or "Error loading DN1" etc will occur.
If you do not have an shortcut , just make one manually.

How to solve application error?

Just disable the antivirus first; uninstall the software and try again. Maybe you skip some step or operate wrong.

How to fix Winols showing "74 checkums, thereof 12 not okey" when opening stock file?
You had better drag the your ols in an empty running winols1.721 and when chksum pops up select no. try to correct it manually.

What can you do with WinOLS application?
1.Store as original or version:
For every project the original is stored permanently. Changes will be stored as version (the number of versions is not limited). Changes are displayed in colour and you can restore the original values any time.

2.Multilevel undo:
Up to 50 editing steps can be undone.

3.Scripts for pros:
If you work with similar cars, you can store the changes as scripts. This allows you to apply the changes for every new car within seconds.

4. Automatic comments: You can enter comments for every project and every version. Further more they are automatically commented when you import or create new versions.

5.Online project search:
The online-database can automatically fill in the fields like producer, chassis, etc. Several other fields, like Bosch number will even be filled in automatically when you're offline.

6.Show complete overview:
The project overview shows all your projects in a configurable and searchable list. Within the fraction of a second, even if you have hundreds of projects.

7.Create as versions:
For every project you can create as many versions as like. The version over shows which maps are changed in which version.

8.Open for other projects:
WinOLS can import and export binary data, Intel- and Motorola-Hexfiles. Entire maps and the map list can be exported to Microsoft Excel. Maps can be ex and imported from a project.

9. Accept changes:
Copy the best changes from old projects. Even if the maps were moved to a different position, they will still be automatically recognized.

10. Offer Extensive help:
Texts in the status bar, tool tips for the icons, Instructions for every dialog. WinOLS keeps you informed which every step.

New WinOLS v1.721 image

This article is from:http://blog.obdexpress.co.uk/2016/07/12/free-download-winols-v1-721-v1-500-no-need-activation/

Professional Autel product distributors：https://www.autelsale.com/

Wednesday, January 18, 2017

XTUNER T1 software display

XTUNER T1 Heavy Duty Trucks Car Intelligent Diagnostic Tool Support WIFI software here :

Top 11 Reasons to Choose XTUNER T1 Heavy Duty Trucks Car Intelligent Diagnostic Tool

1. Extensive vehicle coverage for heavy-duty trucks.

2. Complete function including DTC, DTC freeze Info, Live data, Actuation test and Special function.

3. Support standard protocol J1939, J1708 and J1587.

4. Communication: USB or WIFI connection for the VCI.

5. Update: New software update on the internet www.tdintel.com.

6. Supply OBDII and other 10 connector.

7. With brand-new design, the hardware features in stability and anti-interference.

8. The built-in overvoltage protection module is able to protect scanner and vehicle against accidental damage during checking.

9. Work stably and smoothly in high and low temperature environment.

10. Operation System: Windows XP, Windows 7, Windows 8, Windows 10, which allows for more stable performance, better compatibility and expandability.

11. Language: English(Add more languages in the future)

source:http://www.obdexpress.co.uk/wholesale/xtuner-t1-heavy-duty-truck-diagnostic.html

Tuesday, January 17, 2017

Mercedes software download

Mercedes software download:

https://mega.nz/#F!QUAiGYCT!B-LUxzkteHYT2ALz33mrTw

2014.07 DAS Xentry installation guide… Here you go…This how-to guide consists of 7 phases… Read all steps first, then follow it in order.

The detailed guide, esp. for newbies, proposed is intended for personal, educational and experimental use to install Mercedes diagnostic softwareXentry DAS 2014.7 on Windows XP operation system. Newbies must follow it step by step. The experienced cam skip or modulate some steps.

Software requirements:

XP service pack 3 source
partition manager
virtual drive program
winrar
adobe reader 10 or more (installation saves ur time)
Drivers of ur laptop original)…attached file contains dell 630 drivers
inx modified files specific to ur version
Xentry 2 DVDs (original or modified)
EPC 9 2013 base database
EPC 7 2014 update (last according to time of doc. editing)
WIS 7 2014 full (last according to time of doc. editing)
Sdmedia 1 2014
Fixes (bin fix / blacklists/ pic. fix) according to ur version
Key generators
Framework 2.0 and 3.5 sp1 ( saves ur time)
Active Iso maker

Attachment in the post contains many sources above…Search forum for Xentry DVDs, EPC, WIS/ASRA and Sdmedia sources in automotive software section of the forum.

______________________________________________________________________________________

Installation guide:

Phase 1: (XP fresh installation)…..approx: 75 min s

insert bootable XP SP3 CD
enter bios setting and make boot from CD first choice
install win XP with following considerations in order:

Delete ur partitions if already ur HDD is partitioned…
create partition in un partitioned space c : at least 20 GB
install win in c: partition after formatting drive in NTFS””not quick””
create two accounts : the first is STAR , the second OWNER
login to both accounts
restart ur system
login to STAR
Install partition manager (see sources)
partition as follows (120GB HDD is minimum requirement) :

D: 3 GB

E: 50 GB

F: 35 GB

Note: letters are extremely important..NTFS is mandatory…use Default allocation size

Restart is required to apply partitions by partition manager program…
Login to STAR…Open My computer…format partitions again.. now u can use quick format don’t forget NTFS and Default allocation size.
install drivers correctly
Go to control panel<system<hardware<Device manger to confirm that no device hasn’t installed..If u find a device not known install its’ driver..
Restart system as required by some drivers..
After that install: Adobe reader /Virtual clone program /winrar.
NOTE: if you have the enough experience u can save the time and do partitions as follows from the start in XP setup:
C : at least 20 GB

D: 3 GB

E: 50 GB

F: 35 GB

Phase 1 completed

______________________________________________________________________________

Phase 2: (Preparation for Xentry installation)….approx. 5 min s

Go to Newguide2j file(see sources)
click WFP switch (stands for Windows File Protection)
restart ur system as required to apply settings
Logging to Star account
Go to Newguide2j
Click prepare batch (follow commands..10 steps will be executed)..system will be restarted
Login to Star..u will find Star Utilities in ur desktop

Phase 2 completed

______________________________________________________________________________

Phase 3: (Preparing installation DVDS)..Skip this if u already downloaded trusted modified DVDS to phase 4 ….approx. 30 min s

THE KEY TO INSTALL THIS SOFTWARE IS Setup.inx file trick:

you must create a DVD with the amended file Setup.inx, by replacing file setup.inx with the one on the DVD so you can run the software Be CAREFULL HERE!!

Follow steps bellow:

Go to ur DVD 1…right click..extract the DVD1 IN A FILE ON YOUR LAPTOP DESKTOP

Go to Setup modified folder..(According to ur version..See sources).
Copy the setup.inx file and notice its folder name
Return to the extracted DVD1 folder
Find the folder name similar to that in Setup modified folder
Paste the setup.inx TO REPLACE THE OLD FILE
Will say there is same file name and size..click replace
Do the same for DVD2.

Convert both back to Iso format (use Active iso program..see sources)
follow steps :

Open Active iso maker program
Select New iso
Use UDF option.
DRAG all the content of the replaced setup.inx files DVD to the root in the program (extremely important) i prefer to use Ctrl+A to select all files then drag them to the program(Active iso program)
Save files with name DVD1 for 1 and DVD2 for 2

By the end u have 2 new modified iso files READY TO INSTALL THE SOFTWARE

Phase3 completed

New break through:
now u can make ur machine with appid 250 as original xentry kits so u can skip this phase and go immediately to phase 4:

that is so easy and time saving thanks to people worked them..click here :

http://mhhauto.com/Thread-DAS-Xentry-Multi-Solution-2014?pid=351190

______________________________________________________________________________

Phase 4: (DVD1 Xentry installation) ….approx. 75 min s

Set time to month after ur DVD release
Go to STARTUTILITIES in desktop.. click star key center
Insert keys for Xentry and WIS and Das with the following considerations:

Use key gens provided in sources.
BE aware to tick expiry date for the keys and set it forward eg. 01/01/2020
BE aware in xentry key to set the start day to 2 days before ur system date
keys need information as Hardware id and App id and LAN id….Copy them correctly form the startkey to generate the right key
click save
if it is correct and saved u will notify that validity appeared after clicking save

mount DVD1
explore mounted dvd1/ STARDIAG
click setup
Setup will start
Choose Lang.
Wait and follow instructions ordinary
Setup will pop up that no startkey click yes…setup will launch StartKey with new appearance
Insert new key using Xentry key generator BUT NOW Appid is 253 and NEW hardware id…Save key…
Exit start key
Setup will continue….

NOTES:

Setup will need to restart..This is ordinary..after restart launch setup again as previous if not launched automatically
Error will appear during antivirus update..close the small window and ignore that error
if windows protection appears because u don’t follow the guide strictly read the message carefully and let the program to replace the original windows files
Plug computer to power source…if u don’t the setup will be terminated!
New login will appear … wait…don’t switch of lap.
Steps 10,11,12 will not happen if u use the New brake through of appid 250

DVD1 complete successfully and setup will require DVD2 after restart

Phase 4 completed

______________________________________________________________________________

Phase 5: (DVD2 Xentry installation) ….approx. 150 min s

mount DVD2
Explore DVD2 < STARDIAG
Click setup
Setup will start
WaitJ
Setup will complete and require YOU to click finish to restart…DON’T CLICK FINISH!!
Go to Newguide2j
Click after installation patch
Return to Xentry setup and now click finish..System will restart and hot fixes installation begin
Wait until hot fixes finish then system will be completely loaded

NOTE:

Setup will need to restart…This is ordinary..after restart launch setup again as previous if not launched automatically

Phase 5 completed

Now you have XENTRY…

______________________________________________________________________________

Phase 6: (fixes and config. phase)…approx. 15 min s

Navigate to: Control panel > System > Hardware > Device manager > Ports (COM & LPT). Right click on that COM port you have left enabled and select Properties.

Go to Port Settings tab and set these values:

Bits per second: 115200

Data bits: 8

Parity: None

Stop bits: 1

Flow Control: None

Then click on Advanced… button and make sure Use FIFO buffers are checked and COM Port Number is set to COM2.

Press OK and close Device manager.
THIS for Part D

Apply pic. fix
Apply bin fixes (search the forum according to ur version).
Apply blacklist (search the forum according to ur version).

Phase 6 completed

_____________________________________________________________________________

Phase 7: EPC net and WIS\ASRA and SDmedia installation …Approx. 150 min s

Mount to virtual DVD : EPC of the latest update(7 2014)
Click startNOTE: in this stage EWA server is installing and also java follow instructions appear to u.
Now open EWA Admin tool and insert EPC and WIS startkey in startkey tab (keys are provided in our forum by friendly members.
Back to EPC tab…Click install EPC…
___NOTES:
the installation will request a base line source of 9 2013 EPC..Mount them according to the DVD tag file required..Make sure to mount the requested DVD..otherwise u will face a problem of (no installation medium),,in case of iso made by you if u mistake in the iso creation that u put all folder as a root u will face the problem also(simple mistake with huge effect of failure)Now EPC 7 2014 with base line 9 2013 installed.
Go to EWA net..User and pass is admin…change ur pass
Note…From here download and follow EWA net installation guide..If ur successful EPC icon appears in programs…click here:http://mhhauto.com/Thread-Original-Mercedes-EPC-WIS-ASRA-User%E2%80%99s-Installation-Guide
Here is the trick…Go to EWA admin tool to install WIS…Click preferences>Extended functionality…new tab will be added..
Click WIS update and flow the instructions and required DVDsNOTE: it will check installation media compatibility and requires EPC DVD to check compatibility…
Then it requires the 2 WIS DVD

Go to EWA page log again and do the same done for EPC…WIS icon appears..Click on it and ENJOY!!

///////////////
This guide is a product of try and error of installation..Hours of search..Kind reply to questions by great members..Sources provided is just a collection from the forum to save time only..They are not invented or created by me and some of them from internet.

Special thanks to Member MOTASEM & LuisAndre
Hope this is helpful and time saving….
To avoid any issues of das xentry installation, you can also spend some dollars to get a plug-and-play disk with das xentry installed and ready for use. A trusted dealer: http://www.mbstartool.com/wholesale/mb-star-software/
For Windows 7 & Windows 8 users, refer to

Xentry DAS Windows 8 SSD

xentry das windows 7 ssd

xentry/das windows 8 HDD

xentry/das widnows 7 hdd