Free download Carprog fw 8.21 sw 9.31, 10.93

obdexpress.co.uk engineer offers the mega free link of Carprog software 9.31 and 10.93. As well as installation guide and test reports.

Carprog software 9.31 free download:
https://mega.nz/#!oQRyiYwS!nYR2BGzKesgz0spuRYfr5wQFSABLpCO8v7zB7rhXbrY
No pass

Carprog software 10.93 free download:
https://mega.nz/#!pIggmQ7C!K0TwZSL23IDEqRCjBB8Qvg3BfQzQ95hulJXTqdLffcU
No pass

Both 9.31 and 10.93 are compatible with Carprog firmware 8.21 interface.


Installation guide:
How to Install Carprog V10.93 on Win 7?


How to Install Carprog V10.05 on Win 7?


How to install Carprog full v8.21 software


Carprog Clone reviews:
All About Carprog Clone
https://mhhauto.com/Thread-All-About-Carprog-Clone?page=6&highlight=carprog
About test results, as well as questions and answers .

Free download and setup pcmflash 1.94 1.95 for KTMflash

Free download and setup pcmflash 1.94 1.95 for KTMflash ECU programmer clone, as well as KTMflash reviews.

Part 1: pcmflash 1.94 / 1.95 free download

Please firstly confirm the version number on the USB key.

1) pcmflash 1.94 free download

 https://mega.nz/#!IcRXkIDZ!TXG9qZ1NJbWqaG7xHssyn2oIUx_rBV5NPM821nUJAd0

2) pcmflash 1.95 free download
https://mega.nz/#!gFRBHS5S!pkOaxfaTkGIYqB7VdfjXih9uPAYQl_BmVskQ2LYJ6hE

Works with KTMflash ECU programmer perfectly.

Part 2: pcmflash 1.94 / 1.95 installation

PCMflash version: 1.1.94 for example:

Select Tractrix Inc. – OpenPort 2.0 J2534 ISO/CAN/VPW/PWM

Part 3: reviews on pcmflash 1.94 / 1.95 working with KTMflash

1. edc17C10 work fine with this tactrix clone.

checksum ok all ok ,read write rapid , excellent

tactrix connected to the rear of the power box and in front gpt and tricore cable,cable gpt and tricore ktag seems to be ok and help of dimsport or ktag yes, good box.

2. edc17cp14 R/W chk ok

3. dsg work fine (not tested by obd2) and you can use with windows 7 with no internet connexion (not tested with connexion)..

this clone work same as ori with good tactrix hardware.

4. Read Audi A4 TC1796 ok

Guide:

5. Read write MT80 ok

Guide:

6.Read Audi C7 DQ gearbox ok

Guide:

7. Read Bosch ME17 8 8 TC1724/1728 ok

Guide:

8. Read VW DSG DQ250 transmission ok

Part 1:

Part 2:

Because the video is too long to upload for one time.

To be continued……

 Source:http://blog.obdexpress.co.uk/2019/03/28/free-download-and-setup-pcmflash-1-94-1-95-for-ktmflash/

Free download Renolink V1.67, V1.52, V1.54, v1.49 for blue & red cable

Hello everyone. I have an OBDLink SX cable and I have seen that I can use the Renolink software. Does anyone have this software working with this interface? Thanks.

Yes sir

1. Renolink V1.67

Here V1.67....works with blue and red cable.
http://www.obdexpress.co.uk/wholesale/renolink-obd2-renault-ecu-progarrmer.html
In testing and supposed to be OK in next week.

2. Here this is a clone no need activation and cheap:

Renolink V1.52:
http://www.obdexpress.co.uk/wholesale/renolink-obd2-renault-ecu-progarrmer.html
Woks 100% OK
Video: https://www.youtube.com/watch?v=SLcEKMvMpaA

PASS after Thanks + Reputation ( poster mikroel at DK forum).
before use plug red cable & open application " INTERFACE PREPARE " on desktop

3. Renolink V1.54 activated:

https://mega.nz/#!rJs3UARA!Ca6ivXAmqq6wvpuyH1Hbn47o8tFEW3gCqsczwwJCjBs
activated for blue CABLE ALIEXPRESS
support : Laguna 3 , Megane 3 & Scenic 3 "phase 1" !!!!!!!!

4. Here is link for v1.49 activated

https://mega.nz/#!n1gByaAD!AR_N5Vxf8AI8WZDYX-f6npq4GMP2IyaiEeD0LLmEOOk

5. Or you by original from author Gabi, use google

Note:
do not put the renolink.dat to the blue cable because it will be used for business. That is why the project will end here.

That's all.